Billiard Cloth Yardage Calculator: Pool Table Felt Coverage for 7, 8, 9-Foot and Snooker Tables with Bed and Rail Breakdown
The only free US billiard cloth calculator that separately calculates bed cloth and rail cloth yardage, shows exact cut dimensions for each piece, works for all US pool table sizes from 7-foot bar tables to 12-foot snooker, supports both 62-inch and 78-inch wide cloth rolls, and estimates cost for standard, Simonis, and worsted cloth options.
🎱 Bed + Rail Separately📐 Cut Dimensions Guide📏 62″ and 78″ Rolls💰 Cost Estimate🔧 DIY and Pro Mode
Pool Table Size
inches
inches
Measure the playing surface only, not the cabinet. Do not include the rubber cushions or rails in your measurement.
Cloth Specifications
62-inch wide cloth is standard at most US billiard suppliers. 78-inch wide cloth (Simonis 760 and similar) allows cutting bed and rails from a single roll width on 9-foot and smaller tables.
🎱 Cloth Yardage Results
🎱
Select your table size, choose your cloth roll width and grade, check DIY or professional installation, then click Calculate Yardage. You get separate bed and rail yardage, exact cut dimensions for each piece, total yards to purchase, and an estimated cost range for your cloth type.
0 yds
TOTAL TO PURCHASE
0
Bed Cloth
0
Rail Cloth
0
Total Purchase
Yardage Breakdown by Zone
Billiard Cloth Coverage: How US Pool Table Sizes Determine Felt Yardage Requirements
Pool table cloth (commonly called felt in the US, though most modern billiard cloth is a blend of wool and nylon rather than traditional felt) must cover two distinct surfaces on every pool table: the bed (the large playing surface between the cushions) and the rails (the six separate cushion sections that run around the perimeter of the table). These two surfaces require completely different cutting approaches from a roll of cloth, and their yardage requirements must be calculated separately to avoid purchasing too little cloth or cutting pieces in the wrong order and wasting material. Every US pool table, from the 7-foot coin-operated bar tables common in American taverns and pool halls to the 9-foot regulation-size tables used in BCA (Billiard Congress of America) and World Pool-Billiard Association sanctioned tournament play, follows the same fundamental cloth coverage geometry, with the playing surface dimensions determining everything.
The BCA, based in Colorado Springs, Colorado, is the national governing body for amateur pool and billiards in the United States and sets the equipment standards followed by US tournament organizers and commercial pool halls. BCA equipment specifications define the 9-foot table (playing surface 50 by 100 inches) as the standard for professional and serious amateur competition in the US. The 8-foot table (playing surface 44 by 88 inches) is the most common residential pool table size in the United States, found in the majority of US home game rooms. The 7-foot bar-size table (playing surface 39 by 78 inches) is the dominant commercial pool hall and tavern table, making up the largest installed base of pool tables in the US by count. All three standard sizes use the same 6 rails (two long rails and four short rails, including the two end rails and four side pockets) and require the same approach to cloth installation, with only the dimensions changing.
How Billiard Cloth Rolls Work: 62-Inch vs 78-Inch Width
Billiard cloth in the United States is sold from continuous rolls, most commonly in 62-inch and 78-inch widths. The 62-inch width is the most widely available width at US billiard supply retailers including Seybert’s Billiards Supply, Mueller Recreational Products, and Billiard Warehouse, and is the standard for all major US cloth brands including Championship Billiard Fabric (manufactured in Boca Raton, Florida) and Simonis cloth (a Belgian brand widely distributed in the US). The 78-inch wide cloth (used for Simonis 760 and several other premium brands) offers an advantage for larger tables: a single pass of cloth can cover both the bed piece width and still have enough remaining width to cut the six rail strips, potentially allowing installation from a smaller total yardage purchase. This calculator accounts for both widths and shows strip-cut efficiency for your selected roll width.
How This Billiard Cloth Calculator Works for US DIY and Professional Pool Table Recovering
The calculator computes yardage in two stages. For the bed, it takes the playing surface length and width, adds 6 inches of overhang on each side (12 inches total per dimension) for stapling or tucking under the slate, and calculates how much cloth length to cut from the roll. For the rails, it calculates the length of each of the six rail pieces (with 6 inches of overhang at each end for wrapping the corners), then determines how many rail strips can be cut from the width of the roll and how many linear yards of cloth are needed to yield all six strips. The DIY waste factor (15 percent) accounts for the higher probability of measurement errors, miscuts, and material waste when installing cloth without professional experience. The professional waste factor (5 percent) reflects the minimal waste of an experienced installer who pre-measures each piece precisely. The cut dimensions guide box shows the exact measurements for each piece, which you can use to mark your cloth before cutting.
US Pool Table Cloth Yardage Reference for 7, 8, 9-Foot and Snooker Tables
Table Size
Playing Surface
Bed Cloth (62″)
Rail Cloth
DIY Total
Pro Total
7-Foot Bar Box
39″ x 78″
2.5 yds
1.2 yds
4.3 yds
3.9 yds
8-Foot Home
44″ x 88″
2.8 yds
1.3 yds
4.7 yds
4.3 yds
8.5-Foot Oversize
46″ x 92″
2.9 yds
1.4 yds
4.9 yds
4.5 yds
9-Foot Pro
50″ x 100″
3.1 yds
1.3 yds
5.0 yds
4.5 yds
10-Foot Snooker
56″ x 112″
3.4 yds
1.5 yds
5.6 yds
5.1 yds
12-Foot Full Snooker
67″ x 134″
4.1 yds
1.7 yds
6.7 yds
6.1 yds
Three US Pool Table Recovering Scenarios: Real Yardage Calculations
Chicago, IL: Basement 8-Foot Home Table
8-ft, 62″ cloth, Championship felt, DIY
Playing surface44″ x 88″
Bed piece needed56″ x 100″ = 2.78 yds
Rail strips from 62″10 strips of 6″
Rail yardage1.28 yds
Base total4.06 yds
With 15% DIY bufferPurchase 5 yards
Cloth cost estimate$40 to $75
Dallas, TX: Pool Hall 9-Foot, Simonis 760
9-ft, 78″ wide cloth, professional install
Playing surface50″ x 100″
Bed piece needed62″ x 112″ = 3.11 yds
Rail strips from 78″13 strips of 6″
Rail yardage (78″ roll)1.02 yds
Base total4.13 yds
With 5% pro bufferPurchase 4.5 yards
Simonis 760 cost$81 to $126
Las Vegas, NV: Casino 10-Foot Snooker
10-ft snooker, 78″ worsted cloth, pro
Playing surface56″ x 112″
Bed piece needed68″ x 124″ = 3.44 yds
Rail strips from 78″13 strips of 6″
Rail yardage1.14 yds
With 5% pro bufferPurchase 5 yards
Worsted cost estimate$125 to $225
Expert Tips: Choosing US Billiard Cloth Brands, Speeds, and Installation Techniques
01
Match Cloth Speed to Your Playing Style and Ball Speed Preference
Billiard cloth speed (how fast the balls roll across the surface) is one of the most important and most overlooked factors when recovering a US pool table. The Simonis 860 (rated approximately 9.7 on a 1-10 speed scale) is a Belgian worsted wool cloth widely used on professional tour tables in the US, including on tables at the US Open 9-Ball Championship and many BCA-sanctioned events. The Simonis 760 (rated approximately 9.0) is slightly slower and more durable, preferred for pool halls and home tables with frequent play. Championship Billiard Fabric, made in the US (specifically by Iwan Simonis under the Championship label), produces mid-speed cloth rated approximately 6-7 that is appropriate for most US home game rooms and recreational pool halls. For beginners and casual players, a mid-speed cloth in the 6-7 range is actually preferable to very fast cloth like the Simonis 860, because slower cloth is more forgiving of off-center hits and helps develop stroke accuracy before transitioning to professional-speed surfaces.
02
Cut Cloth in the Correct Direction for Smooth Ball Roll
All billiard cloth has a nap direction (a slight directional texture to the fiber weave), and installing the cloth with the nap running from the foot of the table to the head of the table (in the direction of the break shot) is the standard US professional installation practice. Running with the nap means the fuzzy texture leans toward the foot of the table, which slightly favors ball roll in that direction and is the orientation that produces consistent play across the entire surface. Installing cloth against the nap (or with nap running sideways) causes inconsistent ball behavior and can make cue ball deflection behave differently depending on whether you are shooting toward or away from the nap direction. Most US billiard cloth rolls have the nap running along the length of the roll, so when cutting the bed piece, cut it with the long dimension along the roll length. Mark the nap direction on each piece before cutting so you do not accidentally flip it during installation.
03
Staple Pattern and Tension Determine Cloth Longevity
The installation technique matters as much as the cloth quality for long-term performance. US professional pool table mechanics typically use a heavy-duty staple gun with 3/8-inch staples, working from the center of each side outward toward the corners, applying tension evenly across the width before each staple. Uneven tension produces ripples in the cloth surface that affect ball roll and are almost impossible to remove once the cloth is fully stapled. For DIY installations, the most common mistake is starting at one corner and working around the perimeter sequentially, which traps uneven tension in the cloth and causes visible waves by the time you reach the last corner. A staple gun designed for upholstery work (available at US home improvement stores including Home Depot and Lowe’s) is adequate for most home installations; professional table mechanics use dedicated upholstery staple guns or electric staplers for efficiency on commercial tables. Rails should be installed with the cloth pulled firmly but not over-tensioned: too little tension produces loose, rippled rail cloth that deadens cushion response; too much tension distorts the cushion profile and affects how the balls rebound off the rails.
Simonis Cloth in US Pool Halls and Tournament Venues
Simonis cloth, manufactured by Iwan Simonis S.A. in Verviers, Belgium, is the most recognized premium billiard cloth brand in the United States and is the most frequently specified cloth for professional US tournament tables. The BCA, WPA, and most major US billiard organizations do not mandate specific cloth brands for sanctioned play, but Simonis 860 and 760 are overwhelmingly the preferred choice for US professional and high-level amateur events due to their consistent speed, excellent ball reaction consistency, and long service life. Simonis 860 is marketed as a worsted cloth (meaning the wool fibers are combed parallel before weaving, creating a smooth, direction-oriented surface with very little fuzz), which produces the fastest and most consistent playing surface available. The Simonis 760 has a slightly more textured surface with moderate nap, making it more forgiving of English and spin shots that can misbehave on extremely fast cloth. Both are available at US specialty billiard retailers including Seybert’s Billiard Supply (seyberts.com) and Mueller Recreational Products, typically priced at 18 to 30 dollars per yard in the US market in 2025-2026. Championship Billiard Fabric, which includes the popular Tour Edition series, represents a mid-range US alternative that provides good performance at roughly half the price of premium Simonis cloth and is the most commonly specified cloth for US bar tables and mid-range home tables.
What US Pool Table Owners and Recovering Professionals Ask About Billiard Cloth Yardage
The yardage needed depends on your table size and cloth roll width. For a standard US 8-foot home table with 62-inch wide cloth, you need approximately 4 to 5 yards total (including a DIY waste buffer). For a 9-foot tournament table with 62-inch cloth, plan for 4.5 to 5.5 yards. The exact amount breaks down into bed cloth (the large playing surface piece) and rail cloth (6 strips for the cushion rails). This calculator provides the precise breakdown: a 9-foot table needs approximately 3.1 yards of cloth for the bed and 1.3 yards for the rails, totaling 4.4 yards before a waste buffer. With a 15 percent DIY buffer, you purchase 5.5 yards and round to the nearest half yard. Always buy slightly more than the minimum calculation suggests: leftover cloth can patch problem areas, and coming up short during installation means a second purchase with potential dye lot differences.
Traditional felt is a non-woven fabric made from pressed fibers, while billiard cloth is a woven fabric made from wool and nylon yarn. Most modern US pool tables use billiard cloth rather than traditional felt, even though the material is commonly called felt in everyday American speech. True felt (compressed, non-woven fiber) was used on pool tables historically but does not have the durability, speed consistency, or smoothness of woven billiard cloth. Entry-level pool tables sold at US retailers including Walmart, Target, and sporting goods stores often come with synthetic felt (a polyester blend) that is inexpensive but wears quickly and plays inconsistently. Mid-range and high-end US pool tables come with wool-nylon blend woven cloth, with premium tables specifying Simonis or Championship Tour Edition from the factory. When recovering a table, the upgrade from synthetic felt to a quality woven billiard cloth dramatically improves play quality. This calculator works for any type of pool table covering material measured in yards from a roll.
The playing surface (also called the slate or the bed) of a standard 9-foot pool table is 50 inches wide by 100 inches long, which represents a 1:2 ratio between width and length. This is the BCA-standard tournament size used in professional US pool competitions and is the table size specified for most major US billiard events. The table cabinet is larger than the playing surface because the rails, cushions, and pockets extend beyond the slate edge: a 9-foot table typically has an overall cabinet dimension of approximately 58 inches by 108 inches. The cloth you cut for the bed must account for an overhang of 6 inches per side (to wrap under the slate and staple to the underframe), making the bed cloth piece approximately 62 by 112 inches. This 62-inch width exactly matches the standard 62-inch billiard cloth roll width for a 9-foot table, which is not a coincidence: the standard cloth roll width was designed to accommodate the 9-foot table bed with overhang.
Measure the playing surface from cushion nose to cushion nose (the point where the rubber cushion meets the cloth surface at the playing level), not from pocket to pocket or from the outer edge of the rail to the opposite outer edge. The cushion nose-to-nose measurement is the true playing surface and is the dimension that matches the standard table size designations (39 by 78 inches for 7-foot, 44 by 88 inches for 8-foot, 50 by 100 inches for 9-foot). Use a steel tape measure and measure at the widest point in both directions. If your table has been played on heavily for years, the cushions may have compressed slightly, which can cause minor dimensional discrepancies. For cloth installation purposes, the playing surface measurement determines the bed piece width and length: add 12 inches (6 inches per side) to each dimension for the staple overhang, and that is the cloth piece you cut. The calculator’s custom dimension option accepts your measured playing surface dimensions in inches and calculates the correct cloth requirements accordingly.
For most US home game rooms with a few hours of play per week, Championship Billiard Fabric’s Tour Edition (a wool-nylon blend in the 20-25 dollar per yard range) provides excellent value: good speed, durability of 5 to 8 years with moderate use, and easy availability through US online billiard retailers. Simonis 760 is the upgrade choice for home players who want a professional-feel playing surface: it is rated approximately 9.0 for speed (vs. 6-7 for Championship standard cloth), has exceptional durability and consistency, and is the cloth most commonly found in US pool halls and billiard clubs. Simonis 860 is best reserved for players who have experience on fast cloth, as its 9.7 speed rating makes position play significantly more demanding: shots that play conservatively on slower cloth will leave cue ball in unintended positions until you adjust your speed control. For family game rooms where children or non-regular players will use the table, a mid-range cloth at 12 to 18 dollars per yard in a green or burgundy color (the two most common US pool table cloth colors in homes) provides a durable, forgiving surface at reasonable cost.
A professional US pool table mechanic typically takes 1 to 2 hours to recover an 8 or 9-foot table, including removing the old cloth, cleaning the slate, installing new bed cloth, recovering all six rails, and reinstalling the rails. A first-time DIY installer typically takes 4 to 6 hours, and should plan for a full day if they want to work carefully without rushing. The most time-consuming step is the rails, because each of the six rails must be individually wrapped, stapled, and reinstalled, with the cloth pulled tightly and evenly on all three sides of each rail. Professional mechanics charge between 150 and 300 dollars for a standard 9-foot table re-cover in most US markets, not including the cloth cost. In major US cities (New York, Los Angeles, Chicago), professional recovering can cost 300 to 500 dollars for a premium table with Simonis cloth installation. DIY installation with this calculator’s cloth yardage guidance, a staple gun, and a following of a reliable video tutorial (numerous are available on YouTube from US pool mechanics) can save 100 to 250 dollars in labor, at the cost of several hours of work and a slightly higher waste factor in cloth.
In US residential installations, the most popular pool table cloth colors are traditional green (the historic billiard green derived from outdoor lawn color) and burgundy or wine red (a preference that became popular in US homes in the 1980s and 1990s). Championship Billiard Fabric offers the widest color selection in the US market, with approximately 30 color options including blue, purple, black, tan, gray, and various greens. Simonis cloth is available in fewer colors (approximately 12 to 15), with tournament blue (the color used at most major US billiard events) and simonis green being the most ordered. For US commercial pool halls and billiard clubs, tournament blue has become increasingly common since the early 2000s when televised pool events on ESPN moved to blue cloth for better broadcast visibility, making it the standard for US event broadcast tables. For home installations, color selection is purely personal preference: the cloth does not play differently by color, and any quality cloth in your preferred color from a reputable US supplier will perform equivalently.
The Billiard Congress of America (BCA) is the national governing body for amateur pool and billiards in the United States, headquartered in Colorado Springs, Colorado. The BCA organizes the US Open 9-Ball Championship, US Open 10-Ball Championship, and other major US sanctioned events, and publishes the official rules of play for all major US pool disciplines including 8-ball, 9-ball, 10-ball, straight pool (14.1 continuous), and one-pocket. BCA equipment standards specify that tournament-level play be conducted on 9-foot tables (50 by 100-inch playing surface), with cloth speed in a defined range appropriate for professional competition. The BCA does not mandate specific cloth brands for its events, though Simonis cloth is the de facto standard at most high-level US BCA-sanctioned events. For recreational play, the BCA’s 8-ball rules (the most widely played game in the US) are applicable on any table size, and the BCA publishes a rulebook available at billiardcongress.com that covers equipment specifications, rules of play, and officiating standards for US pool competitions at all levels.
The most obvious signs that a US pool table cloth needs recovering are: visible worn areas (thin spots, pills, or bald patches) typically developing first around the break area (the foot spot and the area just in front of the head string where the cue ball is placed) and along the center line between the side pockets where shots frequently travel; ball roll inconsistency where the ball curves or slows unpredictably due to fiber compression or uneven wear; and visible staining or cigarette burn damage that affects play. On a home table with 5 to 10 hours of weekly play, quality billiard cloth typically lasts 5 to 10 years before visible wear requires replacement. On a commercial bar table with 8 to 12 hours of daily play, cloth may need replacing every 12 to 24 months. A more subtle indication is when regular players notice that balls no longer roll as fast or as straight as they used to: fiber compression and accumulated chalk dust reduce speed over time even before visible wear appears. Regular brushing (using a dedicated billiard table brush, drawn in one direction from foot to head to work with the nap) extends cloth life significantly and is recommended after every playing session on any quality cloth.
For a DIY pool table re-cover in the US, the essential tools are: a heavy-duty staple gun (electric preferred, or pneumatic; manual staple guns typically do not have the power to drive staples reliably into pool table rails) loaded with 3/8-inch staples, a sharp pair of scissors or a craft knife and straight edge for clean cuts, a billiard cloth brush for smoothing the cloth during installation, a rubber mallet for reinstalling rails without damaging the finish, a socket wrench or drill with a socket bit for removing and replacing rail bolts, and optionally a staple remover for taking out old staples cleanly. Total tool cost for a US first-timer is approximately 50 to 150 dollars, with the electric staple gun being the largest expense (30 to 80 dollars at Home Depot, Lowe’s, or Amazon). A drop cloth or moving blanket is useful for protecting the slate while working. Many US billiard supply retailers sell complete DIY recovering kits that include the cloth cut to size, staples, and basic instructions, which can be more convenient than cutting cloth from a roll for first-time installers.
For cloth installation purposes, the main differences between a bar table (7-foot, coin-operated) and a home table (8 or 9-foot, typically non-coin) are the playing surface dimensions and the rail construction. Bar tables have a playing surface of 39 by 78 inches, while the most common home table is 44 by 88 inches (8-foot) or 50 by 100 inches (9-foot). Bar tables’ rails are often single-piece assemblies for each side (rather than separate pocket-to-pocket rail sections), which changes the rail cloth installation process: bar table rails sometimes require a single continuous strip of cloth per side rather than individual cushion wraps. Many US bar tables also use synthetic felt rather than woven billiard cloth from the factory, which means recovering with quality cloth is a meaningful upgrade for bar table owners. The coin-operated mechanism on bar tables does not affect cloth installation. Bar table cloth from standard 62-inch wide rolls is more efficient than for larger tables because the smaller playing surface allows more rail strips to be cut from the bed cloth waste material after cutting the bed piece.
Billiard cloth can be purchased from several US sources at different price points and quality levels. Specialty billiard retailers (Seybert’s Billiard Supply, Mueller Recreational Products, The Billiard Depot, and similar online-only US retailers) carry the widest selection including Simonis, Championship Tour Edition, Zan cloth, and other premium brands. Amazon is convenient for mid-range and budget cloth, with brands including Championship Billiard Fabric available for immediate shipping. Local billiard shops and pool hall supply stores in most US cities carry cloth for immediate pickup, which is useful if you need a specific color match quickly. For Simonis cloth specifically, US-authorized distributors include several specialty retailers who ship nationwide. Sporting goods chain stores (Dick’s Sporting Goods, Bass Pro Shops, Academy Sports) carry basic felt and cloth for home tables but typically stock only entry-level and mid-range products. When comparing prices, note that cloth is sold per linear yard from a roll of fixed width (typically 62 inches), so the total cost equals price per yard multiplied by the yards calculated by this tool. Factor in shipping costs when ordering online: billiard cloth on a roll can be 8 to 15 feet long and ships as an oversize package.
Yes, leveling the slate before re-covering is essential and is the step most often skipped in DIY US pool table installations. Pool table slates are heavy (a 9-foot table typically has a three-piece slate weighing 150 to 200 pounds total) and may shift slightly over time as the table legs settle or the table is moved. Even a slight deviation from level causes the cue ball to drift toward the low side of the table, which is particularly noticeable on long shots and position play. Standard US procedure before recovering is to: (1) check the table level with a quality 48-inch spirit level or bubble level at multiple positions across the slate surface, (2) adjust the table leg levelers until the bubble centers consistently across the length and width, and (3) check the seams between slate sections (on three-piece slates) to ensure they are flush and fill any gaps with beeswax before laying the cloth. The beeswax step is critical on three-piece slates: a ridge at a slate seam, even a very small one, causes deflection when the ball rolls over it and will be apparent through new cloth. Most US pool table retailers and billiard mechanics recommend leveling and waxing the slate every time the cloth is replaced, treating it as a single operation rather than separate maintenance tasks.
The World Pool-Billiard Association (WPA), the international governing body for pool and billiards based in Heidelberg, Germany, specifies Simonis 860 cloth as the standard for its world championship events, including the WPA World 9-Ball Championship and World 14.1 Championship. Simonis 860 is also the standard cloth at the Mosconi Cup (the annual US vs Europe team pool competition), the US Open Pool Championship, and most major US tour events on the Artistic Pool World Championship and World Blackball Pool Federation circuits. The WPA does not specify a single cloth color for all events: tournament blue (Simonis color code 020) has become the de facto standard for televised professional pool in the US and Europe since it photographs well under tournament lighting and provides clear contrast for both the solid and striped balls as well as the cue ball. At US recreational pool halls and billiard clubs that want to emulate professional table feel, Simonis 860 in tournament blue is the premium choice that most closely matches the playing experience of world championship events.
Rail cloth is cut as strips from the width of the cloth roll, typically in strips of 5 to 7 inches wide (this calculator uses 6 inches as the standard strip width, which provides adequate cloth to wrap over the cushion face and staple securely underneath the rail). From a standard 62-inch wide roll, you can cut 10 strips of 6-inch width (with 2 inches of waste) per linear yard of cloth. Each strip is then cut to the appropriate length for that rail section: long rails use strips equal to the playing surface length plus 12 inches for end overhang; short rails use strips equal to the playing surface width plus 12 inches. The advantage of the 78-inch wide cloth roll is that it yields 13 strips of 6 inches per linear yard (with no waste), reducing the total rail yardage required by about 25 percent compared to 62-inch cloth at the same strip width. Some installers prefer wider rail strips (7 or even 8 inches) for more secure stapling, particularly on tables where the rails are worn or the underside is not in pristine condition. If you prefer a different strip width, use the custom dimensions option in this calculator and adjust your roll width calculations manually.
Outdoor pool tables require specialized cloth that can withstand UV exposure, moisture, and temperature variation, which standard billiard cloth is not designed to handle. Standard wool-nylon blend cloth (Simonis, Championship, etc.) will deteriorate rapidly in outdoor conditions: UV light bleaches the color and degrades the fibers, moisture causes stretching and mold, and temperature fluctuations cause slate and frame movements that stress the cloth. US outdoor pool tables, sold by brands including Playcraft, Imperial, and Berner Billiards through major US retailers and pool supply stores, come with outdoor-specific synthetic fabric designed to resist these conditions. These outdoor cloth materials (typically acrylic or polyethylene blends) play differently from indoor billiard cloth and are not comparable to standard wool-nylon club cloth. The yardage calculations in this calculator apply to outdoor tables if you are purchasing outdoor cloth in yards from a roll, using the same playing surface dimensions. However, outdoor table dimensions are often non-standard, so the custom dimensions option is recommended for outdoor table cloth calculations.
Billiard cloth yardage calculations use 6 inches of staple overhang per side for bed cloth and 6 inches per end for rail pieces as standard installation allowances. Actual requirements vary based on specific table construction, rail depth, and installation method. Always purchase slightly more cloth than the minimum calculated amount: dye lots vary between production runs and a second purchase after cutting may not match the original color. Cloth prices are US market estimates for 2025-2026 and may vary significantly by retailer, region, and market conditions. Table playing surface dimensions used as defaults (7-foot: 39×78 inches, 8-foot: 44×88 inches, 8.5-foot: 46×92 inches, 9-foot: 50×100 inches, 10-foot: 56×112 inches, 12-foot: 67×134 inches) are the BCA and industry-standard nominal dimensions: always measure your actual table before purchasing cloth. USCalculators.com has no commercial affiliation with Simonis, Championship Billiard Fabric, Seybert’s, Mueller Recreational Products, the Billiard Congress of America, the World Pool-Billiard Association, or any pool table or cloth manufacturer mentioned in this guide. All brand names are trademarks of their respective owners. For BCA equipment standards and rules of play, visit billiardcongress.com.